Every electrical engineer should be able to…
Design a Circuit
Read a datasheet and understand how to use a part
Design a circuit schematic
Design a PCB (Printed Circuit Board) layout from a schematic
Create a bill of materials and order the parts from a distributor
Analyze simple analog circuits by hand (e.g. using Kirchhoff’s circuit laws)
Simulate an analog circuit using SPICE (I prefer LTspice)
Know how to use a transistor and op-amp in a circuit
Signal Processing / Control
Design a simple (RC) analog low/high pass filter
Perform a FFT (e.g. using MATLAB or NumPy) and understand the results
Understand the difference between time domain and frequency domain
Implement a simple PID controller
Programming
Write basic embedded C/C++ (e.g. for an Arduino)
Know a scripting language (e.g. Python, MATLAB)
Miscellaneous
Support why a design decision was made (preferably with data)
Explain how technical things work to the average non-technical person (With arguement)
Prove Euler’s identity (Although i'm not so good in it).
Thanks for sharing your blog with us I am very inspired by your article kindly share some knowledge about Emergency Electrician want to know about it
ReplyDelete